As a business, BSE 3D use CSR to achieve better relationships with our customers and clients, as well as people in our local community. We also embrace CSR to amplify, rather than degrade, the society that we and future generations inhabit. This is further shown by BSE3D’s signing of the Building Service Engineers Declare pledge, which is a pledge signed by us to reduce both our and our client’s impact on the climate.
We encourage our team to reduce their printing. This is a simple action that can save resources by encouraging our employees to print only when it is necessary, allowing us to save paper and protect the environment. We also encourage our employees to do their mark-ups on a pdf, instead of paper, where possible, to minimize our paper use.
Our new office refurbishment has also helped to make our company setting more eco-friendly. Before we moved into our new office, we refurbished and replaced inefficient services to make the building more efficient. This included adding LED lights with motion sensors to save energy. We also improved our office by adding heat recovery ventilation and heat pump air conditioning, to accommodate the staff and visitors in our office, whilst enhancing the working environment.
Ease of access to public transport has also been introduced in our office relocation. Our office is a 7-minute walk from the train station, which can reduce emissions as employees now have the option to commute by bus/train. Public transport access is also convenient and fuel efficient for site visits and meetings with clients.
BSE3D were recommended to us by the former head of project management at Mace to advise us in relation to a number of areas relating to the Great Northern Hotel’s mechanical & electrical systems. Over a period of almost two years, BSE3D have helped us enormously through a combination of their vast technical knowledge and their ability to diplomatically drive forward our agenda without fear of upsetting the incumbent teams.
Huge thanks and congratulations to BSE 3D on completing your recent cycle challenge. Most of you have been back already, and I hope you are starting to get over your jetlag and getting back to normality. It’s always a bit difficult settling into the swing of real life! I have had a report about the challenge from the local crew, whom spoke extremely highly of you all while on the challenge, so well done – you’ve also all done a phenomenal job raising funds for such a worthwhile cause!!!
We have been delighted with the performance of BSE 3D. They were able to take our requirements, develop our brief and prepare a design all within a tight timeframe. They then tendered and managed the entire build process to budget. I would not hesitate to recommend them.
Our company employ many consultants, to develop design specifications and act as Lead Designer. Over the last two years we have worked together on a new data centre design. On a project of this size there are always areas to be developed and I was particularly pleased with BSE 3D’s response to any issues that arose by providing solution options and making sure the results matched our requirements. BSE 3D produced the Test Specification document used to test the full infrastructure and during the busy commissioning and test phase they were in attendance to witness and sign-off the test documents which confirm the test results fully meet the design standards and test specification.
QData QFZ LLC hired the services of BSE3D for the MEP Design, Consultation and Supervision works of two Data Centers at the Qatar Free Zones of located in Ras Bu Fontas (capacity of 6MW) and Um Al Haul (capacity of 4MW), both of which were customized to the End ?User’s requirements and were successfully delivered. In addition to this, both Data Centers applied for Uptime Institute Tier III Certifications for Design, Construction and Operation in which BSE3D was also involved.
Both projects were well designed, executed and delivered within the agreed time-frame despite many challenges locally and internationally. BSE3D were a key figure in assisting and supporting us as a client to overcome all obstacles, leading to the success of both projects. Their performance and technical support were critical.
We would recommend BSE3D for future projects, given their commitment and their expertise in dealing with regulations within Qatar and the GCC region in general.
We at Colt have worked with BSE3D many times over the years and have always had a brilliant experience with them. The BSE3D team always go above and beyond to ensure designs and projects run smoothly.
In particular as an example; their assistance over the last 3 years on a complicated Generator and switchboard sequencing project has been brilliant. This project was a challenge due to the Data Centre being fully populated and live with customer loads but key switchboard and generator works needed to be completed seamlessly. They created the in depth design brief which was of a very high standard that allowed the project to be completed smoothly with no issues whatsoever.
They are a great team to work with and all members of the team have a very high level of technical knowledge and all work to a very high standard too.
BSE3D have been an unbelievable find for Quantum Switch their contribution to our growth and success in expanding market places coupled with their diligent well experienced certified Data Centre professional engineers has made this possible. What we value most about our relationship is the personal service and technical knowledge available when required. We would have no hesitation in recommending BSE3D Limited for any type of Data Centre projects as long as it’s not in competition.
Talk to Our Expert Team
Our expert team of building services consultants are here to help. If you would like to learn more about the range of services we offer, please get in touch for an informal discussion about your needs and requirements.